Home OrganizingKitchen Appliances How to Reset a Frigidaire Ice Maker: All You Need to Know

How to Reset a Frigidaire Ice Maker: All You Need to Know

By Albert G. Croley
1.4K views 2 mins read

A warm summer evening, a cold drink in hand, and the anticipation of ice cubes clinking in your glass. Sounds like a dream, right?

Well, that’s what I thought too until my Frigidaire ice maker decided to play hide and seek during one such evening. I eagerly turned it on, only to be met with the icy silence of a malfunctioning companion.

A chilling nightmare, indeed! Ever been there?

If you’ve experienced the disappointment of a malfunctioning ice maker, you’re not alone. I’ve been there too, and I understand the pain.

That’s why, in the following discussion, we are going to talk about how to reset a Frigidaire ice maker in a simple, easy step. So, in just a few minutes, you can turn that icy frown upside down and have your appliance working like a cool breeze on a hot day.

Keep reading to find out.

Key Takeaways:
Usually, there are four common issues with frigidaire ice makers: stop producing ice, make less or smaller ice cubes, take longer than usual time, and taste different
Reset in 3 simple steps: press and hold the on/off button of the icemaker to switch off, unplug, wait five minutes, and plug back in. Press and hold the reset or on/off button for 15–30 seconds
Try advanced troubleshooting in case a reset won’t resolve the issue: check and replace the water filter, reposition the water valve, defrost your whole refrigerator, and set the temperature to the standard level (0 to 5)℉ or (-18 to -15)℃.

Common Issues with Frigidaire Ice Makers

Now, as I said, resetting the ice maker in your fridge is usually a simple process. Just like that, if your Frigidaire ice maker is not working, then you are definitely facing one or more of the common issues.

So, let’s go through them and see which one’s giving you a tough time.

No Ice Production

Has your ice maker stopped producing ice at all? As much as it is one of the most common issues, it happens for some very obvious reasons.

First of all, it can happen because of a system malfunction, which, of course, would require you to reset the ice maker. Other reasons depend on the water filter.

If the filter gets too old and is not working properly or dirt gets clogged, then it impacts ice production.

Insufficient Ice

If your ice maker is not supplying the expected amount of ice or less ice than it usually does, then you must first try resetting it.

Ice Cubes Getting Stuck

Guess what? Both of the previously mentioned issues can be a result of this one too. For this too, you have to check and reset the ice maker first. Then comes checking other options.

Ice Cubes Tasting Weird

You take a sip, and something just doesn’t taste right—not the cool, crisp refreshment you were hoping for. Time to play ice detective!

Start by inspecting the water filter; a worn-out one can lend some funky flavors to your ice. Also, give the ice maker and tray a good cleaning; a bit of residue can turn your ice into an unexpected flavor experiment.

Is There a Reset Button?

Well, the good news is that some ice makers do come equipped with a reset button, but the not-so-good news is that it’s not always a big, shiny red button saying, “Press me to fix everything!”

Is There A Reset Button?
Reset Button

If you’re on the hunt for this elusive reset button, start with a little detective work. Check your trusty user manual; that little booklet often holds the key to all your appliance mysteries. Look for terms like “reset” or “restart” in the troubleshooting section.

No luck with the manual? No worries! Give your ice maker a visual sweep. Some models hide their reset buttons behind a panel or cover. Peek around, and you might just find a small, unassuming button waiting to save the day.

But here’s the twist: not every icemaker plays by the same rules!

Some reset themselves automatically after a power outage or a fixable issue. So, if you can’t find a reset button, fear not! A power cycle or addressing the underlying problem might be just what the ice doctor ordered.

Precautions Before Resetting the Ice Maker

Well, now that you have an idea of “how to reset a frigidaire ice maker,” you are just one step away from starting.

Did I just confuse you? Well, before you start, you must be very careful about following these steps as precautions:

Safety First

Do you know what’s non-negotiable before fixing any electric device? Unplug it from the power sources.

Why risk your life by fixing an ice maker? Also, it would save your Frigidaire from any unexpected damage from sudden power flow.

Remember, better safe than sorry!

Go Through the Manual

I know, I know—manuals can be as thrilling as watching ice melt, but trust me, they’re a real-life savior in moments like this. Hence, make sure to take a peek inside that booklet of wisdom that came with your ice maker.

Look for specific instructions, potential warnings, and any nuggets of wisdom the manual might offer. Knowledge is power, my friend!

Observe the Ice Maker Setup

Before you go all handyman on your ice maker, take a moment to observe its setup. Check for any obvious issues, leaks, or loose connections.

Sometimes, a reset is just the tip of the iceberg, and fixing the underlying problem is the real key to success. No need to reset if there’s nothing to fix, right?

Keep the Toolbox Nearby

This is actually a reminder to keep the task simple. In fact, sometimes a gentle nudge or a little tightening here and there is all it takes.

Hence, keep your toolbox close to your hand while resetting or troubleshooting. You know, in case you need to use screwdrivers to access the reset button.

Also, as I mentioned before, resetting may not always solve the issue. You may need it for further troubleshooting steps.

How to Reset a Frigidaire Ice Maker?

Resetting a Frigidaire ice maker is as easy as resetting your favorite device! Let’s walk through the steps to get that ice-making magic back:

Step 1: Locate the Reset Button

As you have come this far from the blog, I hope that you are already done with this part. There is just one more thing to do. Tap the off button to turn off the ice maker, and wait for at least 5 minutes.

Step 2: Press and Hold the Reset Button

Press and hold that button down for 15-30 seconds, like you’re sealing a pact with the Ice Avengers. Feel the power at your fingertips as you initiate the reset sequence. Hold it steady—you’re the commander of this icy mission!

Step 3: Wait for the Ice Maker to Reset

Once you’ve pressed and held that reset button, give it a moment.

After some time, you might hear a satisfying hum or click—that’s the sound of a chilly rebirth in progress.

Step 4: Test the Ice Maker

The moment of truth!

It’s time to put your ice maker to the test. Open the freezer, set the stage for a frosty performance, and wait for those delightful cubes to make their grand entrance.

If everything went according to plan, you’re now the proud owner of a reset and revitalized Frigidaire ice maker.

Alternative Methods to Reset the Ice Maker

Dealing with a fussy ice maker can be a real head-scratcher.

Here are some alternative methods you can try to get that cool, refreshing ice flowing again:

  • The Classic Power Cycle: Unplug your refrigerator for about 30 seconds and then plug it back in. After the reboot, keep an eye out for those first promising ice cubes.
  • Temperature: Sometimes your freezer’s temperature might be playing hard to get. Make sure it’s set to a frosty, but not too frosty, temperature. Aim for around 0 degrees Fahrenheit (-18 degrees Celsius) to keep things chill without freezing your ice maker’s enthusiasm.
  • Water Filter: If your water filter is clogged or overdue for a change, it might be throwing a wrench into your ice-making plans. Swap it out for a fresh one and watch as your ice maker does a little happy dance with clearer, better-tasting ice.
  • Manual Override: Some ice makers come with a handy reset button. Hence, consult your refrigerator’s manual and give that button a press to reset the system.
  • The Defrost Dose: Ice buildup can be a real party pooper for your ice maker. If you notice frosty shenanigans, try manually defrosting your freezer. Grab a towel, unload your freezer, and let it thaw for a bit. Your ice maker will thank you with a fresh start.

Frigidaire Ice Maker Still Doesn’t Work After Resetting It

Now, resetting is the first step if your ice maker is producing less ice, or if the ice maker isn’t making any ice at all. However, if your problem is still not solved, then the upcoming sections are for you.

Frigidaire Ice Maker Still Doesn’t Work After Resetting It
Frigidaire Ice Maker Doesn’t Work

First, let’s see the possible issues that may cause the disruption.

Ice Maker Is Not Making Ice

First off, let’s check the basics. Is your Frigidaire friend properly hooked up to water? It’s the lifeblood of ice-making, after all.

Hence, confirm the water supply and ensure there are no kinks or clogs in the water line. Maybe your water filter is feeling a bit sluggish; consider giving it a spa day with a replacement.

Ice Maker Not Making Enough Ice

Quantity matters, right? If your ice maker is serving up a meager portion, make sure to check if the ice mold is fully loaded.

Is there any chance it’s giving you the cold shoulder due to an overfilled bin? Well, try clearing out the excess cubes, and you might just get a more generous pour.

Ice Maker Takes Too Long to Make Ice

Impatience, your name is waiting for ice! But if it’s dragging its feet excessively, the temperature might be a tad too high. Ensure that your freezer is keeping things Arctic.

Additional Troubleshooting Steps

If you are still facing one or more of these issues, here are some more troubleshooting solutions you can follow:

Defrost the Ice Maker

If your ice maker is not working at all and has stopped producing ice, then. The ideal call is to keep your Frigidaire off for a minimum of 6 hours and let everything defrost.

It may take more time, depending on the size of the ice maker and whether the ice-clogged inside the fridge.

Check the Water Filter and Water Line

Now, let’s talk hydration. Your ice maker needs water like a plant needs sunlight.

Check if the water filter has been changed in recent times. Usually, dirt clogs the filter and disrupts the proper supply of water. Replace it with a new filter.

Also, give the water line a once-over to ensure there are no blockages or kinks. A smooth water flow is the key to a prolific ice-making performance.

Reposition the Feeler Arm

The feeler arm basically works as the conductor for the ice bucket to start and stop making ice.

Sometimes, it gets displaced with time. What you have to do is press it back to its position and make sure that the spring is working. This may take a few tries.

Check the Door Seal and Switch

If your fridge’s door seal got damaged for some reason, then it is causing the temperature to go high. The ice maker cannot function this way.

The same happens if your door switch is faulty. You should repair, or at best, replace, these to get the best result from your ice maker.

Not only this but keeping it this way will simply damage your system over time.

Tips for Keeping Your Frigidaire Ice Maker Running Smoothly

Keeping your Frigidaire ice maker running smoothly is essential for those moments when you crave a refreshing cold drink or need to impress guests with crystal-clear ice cubes.

Tips For Keeping Your Frigidaire Ice Maker Running Smoothly
Frigidaire Ice Maker Running Smoothly

Here are some tips that will have your ice maker humming along without a hitch:

1. Regular Cleaning

You should properly know how to clean a portable Frigidaire ice maker. Keep your ice maker and the whole Frigidaire clean. As much as it helps the system function properly, it also increases your device’s longevity.

2. Check Water Supply

Just like humans need water to survive, your ice maker needs a consistent water supply to thrive. Check for any kinks or obstructions in the water line. If your ice maker is hooked up to a water filter, replace it regularly.

Also, from time to time, check the flow of water. Make sure that the water valve has not been displaced. This will ensure a proper water flow and ice supply.

3. Monitor Temperature

Not too hot, not too cold—just right!

Always keep an eye on the temperature of the fridge and ice maker. Remember, the standard temperature is (0 to 5)℉, which is (-18 to -15)℃. This ensures a proper ice supply and saves you from extra ice clogging.

4. Keep an Eye on the Ice Maker

When it comes to device health and longevity, internal and external connections, plugs, wires, and tears are extremely important. Make sure that all the wires are properly connected and the hardware is working damage-free.

If you notice any damage, call the technician or replace it immediately.

To Wrap Up

Coming this far, you have an in-depth idea of how to reset and troubleshoot your Frigidaire ice maker for all possible issues.

So, the next time your Frigidaire ice maker decides to take an unexpected break, remember this guide and turn the situation around.

With a quick reset, you can turn the tide and enjoy a chilled beverage in no time. Cheers to hassle-free ice and unforgettable summer evenings!

Frequently Asked Questions (FAQs)

Why is my Frigidaire refrigerator ice maker not making ice?

There can be various reasons for your ice maker to make ice. First, try resetting the ice maker. If that doesn’t help, check the water filter and water line. Also, check if the temperature is set properly. The standard temperature is (0 to 5)℉, which is (-18 to -15)℃.

How do you start a Frigidaire ice maker manually?

To start the ice maker frigidaire manually, first, locate the reset button from the manual. Then press and hold it for 10 seconds.

Where is the on-off switch on the Frigidaire ice maker?

The on-off switch of the Frigidaire ice maker varies depending on the company and model. Hence, follow the manual to find out. Usually, it is placed either inside the icemaker or on the control panel, on the side or door.

Can I reset the ice maker on my Frigidaire refrigerator myself, or do I need to call a professional?

You can reset your Frigidaire ice maker yourself. Find the reset button, press it, and hold it for 15-30 seconds. If that does not resolve your issue, try troubleshooting techniques like replacing the water filter and fixing the water line.

You may also like