Home OrganizingKitchen Appliances How to Remove Doors from Samsung Refrigerator Properly: 12 Simple Steps

How to Remove Doors from Samsung Refrigerator Properly: 12 Simple Steps

By isha.m
1.7K views 2 mins read
How to Remove Doors from Samsung Refrigerator

A scorching summer day, and you’re eagerly searching through your Samsung refrigerator for that ice-cold refreshment.

Suddenly, it hits you – wouldn’t it be easier if you could just take off the darn door to get to your drinks?

But, wait!

How to remove doors from Samsung refrigerator? Isn’t it a tough job to do?

Not really, if you know the right way! However, don’t worry.

In the following discussion, we are going to talk about all the steps involved in removing doors from Samsung refrigerators in the most effective way possible. So you can have those doors off in no time.

Key Takeaways:
Gather the necessary tools to safely and efficiently remove the Samsung refrigerator door.
Unplug the unit and start removing the door carefully, following step-by-step guidelines.
If facing difficulties, double-check the manual, unlock any mechanisms, try gentle wiggling, and don’t hesitate to ask for assistance.
Reinstalling the Samsung refrigerator door is pretty easy with the right tools and methods.

Tools and Materials Needed

In order to become a pro, you must gather the right tools and materials. As a result, the door removal process is going to be super easy for you.

So, before beginning, you’ll need the following tools:

  • A Philips Screwdriver
  • Allen wrench or Hex Key
  • Protective gloves
  • Drill
  • Tape
  • Soft cloth or towel
  • Container or bag to store small parts and screws

How to Remove Doors from Samsung Refrigerator: Steps: 12 Steps to Follow

A Samsung refrigerator door removal process is the result of a few steps. Here are the steps, so you can get started right away:

Step 1: Gather Necessary Supplies

It is always a good idea to gather essential supplies to remove the door. By including a range of tools, you can complete the process smoothly.

Gather Necessary Supplies
Gather Necessary Supplies

So, check the supplies like screwdrivers, drills, required bits, hex keys, gloves, soft cloths, etc. Make sure to do it based on the referred manufacturer’s instructions or user manual.

Step 2: Unplug the Sensor Plug

Start with the basics!

Disconnect the refrigerator from the power source. Unplug it to reduce the risk of shock or injury. Locate the power cord that is connected to the wall outlet.

Unplug the Sensor Plug
Unplug the Sensor Plug

Do it firmly.

Unplug it and double-check the power. However, make sure the indicator lights and all components of this unit are turned off.

Step 3: Locate the Hinge Covers

Now look for the hinge cover. You can find it near the hinge.

Generally, it’s on the top and bottom of the door. It keeps the screw under the hood. Afterward, look closely to identify the cover. It may be small plastic caps or plate forms.

Step 4: Remove the Hinge Covers

Don’t worry!

It’s easy to remove the hinge cover. You can remove it by using your finger or a flathead screwdriver. Just pry it gently.

Remove the Hinge Covers
Remove the Hinge Covers

All it needs is a little care and attention.

If you do what I said, then the hinge cover is already out of the league!

Now you can have clear visibility of the screws and reach them. Always use a soft cloth to clean the hinge cover from dirt or debris.

Step 5: Loosen the Hinge Screws

Grab your screwdriver or power drill and start loosening those screws. You don’t need to take them all the way out—just enough so the hinges can move.

Loosen the Hinge Screws
Loosen the Hinge Screws

How to do it?

Apply steady pressure and turn the screwdriver counterclockwise. Do it firmly to avoid stripping or damaging the screws.

Repeat the process for both the top and bottom hinges. Now your door is ready to be removed.

Step 6: Lift the Door of the Hinge

It’s time to apply a classic technique!

Once the hinge screws are loosened enough, you can lift the door off. It might require some extra hands if the doors are heavy.

Start lifting from the top hinge. With a firm grip, lift the door upward. Keep doing it until it’s clear from the bottom hinge.

One more thing, lifting it straight up prevents damage. Hence, set it aside and keep it in a safe place. You won’t need much space for that.

Repeat the process if there are any additional doors available.

Step 7: Remove the Bottom Hinge (If Applicable)

Sometimes, you need to remove the bottom hinge, especially in a few specific models of Samsung refrigerators. You need to do it when it’s necessary to detach the bottom hinge.

To remove it, locate the screw and unscrew it using a screwdriver or power drill. Once it’s done, firmly grip the bottom hinge assembly. Put it aside for further safety.

Step 8: Repeat Steps for Other Doors (If Necessary)

Your refrigerator model may come with multiple doors. For example, the French door model has two separate doors, but side-by-side models have large doors.

In this case, repeat door-removing steps for every individual door. Make sure it’s properly detached from the fridge. Now it’s ready for other required tasks.

Step 9: Reinstall the Doors (If Desired)

Once you are done with the door for its maintenance, repairs, and other tasks, you can now reinstall the door. For the Samsung refrigerator door, you need to start it from the top hinge.

Look for the hinge socket. Afterward, align the door with it and hold it in place. Keep it level with the other doors.

Now insert the hinge pin. It will easily slide into place. Just make sure the door is in place to make it stable and functional.

Moving on, go for the bottom hinge and tighten the screw that you previously removed. Follow this step for the other doors as well.

Step 10: Refitting Freezer Door

To refit the freezer door, refit the chassis bracket first. Use three 10 mm bolts for inserting the lower hinge. Take the door and fit its corner with the hinge hole. You could try to close the door now.

Refitting Freezer Door
Refitting Freezer Door

In the same way, insert the upper hinge shaft. Make it level and refit the screws. Then connect it to 2 plugs.

Secure the hinge with screws and reconnect the water connector. Before connecting it, make sure to check for leakages.

Finally, you can put everything back together.

Step 11: Make Sure the Fridge Freezer is Level

A wonky fridge is no fun. Once everything’s back in place, make sure your fridge is sitting nice and level. Adjust the feet if needed.

Step 12: Adjust the doors

Last but not least, make sure those doors are swinging smoothly. If anything feels off, you might need to adjust the hinges a bit until everything lines up perfectly.

Adjust the doors
Adjust the doors

What to do?

First, unscrew the locking nut. Next, lose the adjuster using the Allen key. It’s for adjusting the height between doors.

Troubleshooting Issues with Removing Samsung Refrigerator Doors

When it comes to removing doors from a Samsung refrigerator, it’s essential to follow the manufacturer’s instructions carefully. Trust me, they’ve designed these babies to be sturdy, but that also means they can be a bit tricky to maneuver.

Now, if you’re having trouble getting those doors to budge, here are a few things to check:

  • Double-Check the Manual: I know, I know, manuals can be about as exciting as watching paint dry, but they’re your best friend when it comes to figuring out how to work your appliance. Make sure you’re following the step-by-step instructions provided by Samsung.
  • Unlocking Mechanism: Samsung refrigerators often have a locking mechanism to keep the doors secure during transport. If you’ve recently moved or transported the fridge, double-check that you’ve unlocked this mechanism. It’s usually a small switch or lever near the hinges.
  • Give it a Wiggle: Sometimes, a little wiggle is all it takes! Try gently rocking the door back and forth while applying pressure upwards. This can help loosen any stuck parts and make them easier to remove.
  • Ask for Backup: Don’t be afraid to enlist the help of a friend or family member. Sometimes, a second pair of hands (and muscles) can make all the difference, especially when dealing with hefty refrigerator doors.
  • Patience, Patience, Patience: Rome wasn’t built in a day, and sometimes, neither is fixing a refrigerator door. Take your time, stay patient, and don’t force anything. Rushing through the process could end up causing more harm than good.

Closing Notes

Finally!

You now have a straightforward procedure for how to remove doors from Samsung refrigerators. It’s only a matter of a few minutes to complete the task and give your refrigerator a new appearance.

With the right tools and proper knowledge, you can be a master at it. However, always handle the doors with care, follow safety precautions strictly, and refer back to this guide whenever needed.

Happy door removal!

Frequently Asked Questions (FAQs)

How do I take the left door off my Samsung refrigerator?

Left or right, it’s a breeze! To take off the left door of your Samsung refrigerator, start by locating the hinge cover. Pop it off gently, and then unscrew the top hinge. Support the door and lift it off the bottom hinge. Voila! Your left door is off.

How do you take the right door off a Samsung refrigerator?

Need to tackle the right door? No sweat! Follow the same steps as with the left door, but remember, it’s a mirror image. Unscrew the top hinge, support the door, and lift it off from the bottom hinge. You’ve got this!

How do you take the handles off of a Samsung refrigerator door?

You need an Allen bit or an Allen wrench to do it. First, open the door. Remove the screw (allen set screw) using a drill. And then, pull the handle back and lift it.

How do I take the handles off the Samsung freezer doors?

Loosen the set screw using a 3/32 Allen wrench. There is a mounting pin. Pull the handle of this pin and slide it to the right. The other end of it will get loose.

What is the best way to reinstall a Samsung freezer door?

First, install the freezer glides. To do that, align the hinges, slide the door onto the bottom hinge pin, and secure the top hinge. Last but not least, don’t forget to check the alignment before tightening the screws.

Is it simple to take the refrigerator doors off?

Yes, it’s simple, and you can do it. It’s like what appliance delivery professionals do. Just remove the door. This process is done through the narrow doorway of your refrigerator. On the other hand, you can also reverse the door, especially with the French door model.

On a Samsung refrigerator, how do you get the drawers out of the way?

Removing the drawers is a cinch. Simply pull the drawer out to its full extension, lift it slightly, and then pull it straight out. Now you have all the space you need.

What is the best way to open a freezer door that has become stuck?

Start by checking for any obstructions around the door. Then, gently try to wiggle it back and forth to loosen it. If that doesn’t work, grab a hairdryer to gently heat the edges of the door seal. This should help it thaw and open smoothly.

You may also like